Check your product specifications for recommended internet speeds as they vary. It is possible that your network upload speeds may be insufficient. If you are using a Night Owl CMS product, you can check and confirm you have the latest software updates HERE. If you are on a mobile device, check the Play Store or App Store for any updated. By restarting your system, it will check to see if there is new firmware available to download.Įnsure the application you are using is updated. If you are connected to the internet, ensure the NVR is connected directly to your router.Ĭheck to ensure the latest firmware is on your System. Verify all your wires are connected properly to your NVR. My Night Owl App and/or Night Owl CMS Software is not connecting, how do I fix it?. ![]() The infrared sensor works best for side to side movement across the camera’s field of view as opposed to movement directly to or away from the camera. above the ground and have them angled slightly down. Please make sure you have mounted the cameras at least 7 ft. So, you will want to have the cameras installed in their final location by then. What is the best way to mount the cameras?ĭuring the Startup Wizard, you will be prompted to adjust the motion detection area of each installed camera.If they do, you may need to purchase an additional camera power adapter for that camera. Try plugging the camera directly into the camera power adapter, bypassing the splitter, to see if the LEDs turn on. It is possible that your camera is not receiving enough power for the LEDs needed for Night Vision. Why does my camera stop working at night?.The Night Owl 4k Security Cameras are pretty amazing. Designed and engineered in the USA: all Night Owl products are proudly designed and engineered in the United States. However, Night Owl strongly recommends placing all outdoor cameras under an eave or awning to help shield them from overexposure to the elements, which could reduce your camera’s lifespan. NOTE: This DVR is compatible with our DP2 and DP8 Series Wired Cameras and WNIP2 and WNIP8 Series Wi-Fi devices. Yes, your cameras are weatherproof and will endure minimal moisture and dirt/debris. After your system is set up, you can disconnect the TV or monitor if you wish. For older systems that use Night Owl Connect, you will need to connect your NVR to a TV or monitor for initial setup. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |